Chevron SRI Grease NLGI 2 delivers value through:

• Wide application range — Suitable for high rpm operation, operating temperatures ranging from -29°C to 177°C (-20°F to 350°F).
• Excellent oxidation stability — Provides exceptional bearing life at operating temperatures in the range of 93°C to 177°C (199°F to 350°F).
• Excellent rust protection — Provides exceptional rust protection as defined by ASTM D1743-73 with 5% Synthetic Sea Water

• Excellent oil film strength and EP protection resists wear under severe shock loads
• High adhesion provides high performance protection over extended re-lubrication intervals
• High tackiness grease collar seals bushings preventing dirt, dust and water ingress

• Extremely resistant to water wash-out in very wet or muddy situations
• Optimum rust and corrosion protection in wet or muddy conditions

• Protects metal surfaces
• Effective EP additive protects against component wear under high load conditions. Rust and corrosion inhibitors protect metal surfaces.
• Resist oxidation
• Formulated with antioxidants to resist oxidation to enhance grease service life.
• Good pumpability
• Good pumpability characteristics of the lithium thickener provide suitable flow properties for grease pump application systems (NLGI 2).

Can include:

• Automotive wheel bearings
• Chassis grease point lubrication
• Industrial plain and rolling element bearings
• General plant lubrication

• Protects Metal surfacesCombination of a lithium complex thickener, oxidation inhibitor, and synthetic base oil provides resistance to hardening in service. EP additives provide outstanding wear protection under heavy and/or shock loads. Effective rust and corrosion inhibitors protect metal surfaces in wet conditions.
• Wide temperature range applicationThe high viscosity index synthetic base oil resists thickening at low temperatures and enables use over a wide temperature range. The excellent oxidation stability of the base fluid components enables operation in continuous high temperature environments.
• Effective friction reducerHigh viscosity index synthetic base oil and tackiness additive maintain oil viscosity and provide adhesive properties which prevent oil leakage in high speed and high temperature conditions.

Can include:

• Pulp and paper applications
• Steel industry applications
• Mining industry
• Marine

• Temperature stableDelo Grease ESI uses a lithium complex thickener system and has a dropping point of approximately 266°C. Delo Grease ESI has excellent high temperature stability up to 177°C.‡ Delo Grease ESI can also be recommended for applications operating down to -18°C.**
• Effective water resistanceNatural water resistance of the lithium complex thickener, combined with the additional tackiness additive, prevents water washout.
• Protects metal surfacesHigh level of anti-wear and extreme pressure additives protect against component damage by wear and shock loading. Highly loaded parts operating under boundary lubrication conditions are protected, giving longer equipment life and improved reliability. Effective rust and corrosion inhibitors protect metal surfaces under conditions of severe water exposure

• Clarity Synthetic Hydraulic Oils AW are designed to offer effective protection to both mobile and stationary hydraulic vane, piston and gear-type pumps in both
high-performance industrial applications and environmentally sensitive areas
• Clarity Synthetic Hydraulic Oils AW are designed to meet or exceed the performance requirements of conventional anti-wear hydraulic oils, in severe,
high-output applications such as axial piston pumps, while offering an additional level of safety in case of leaks or incidental discharge to the environment
• Many hydraulic systems are required to operate in environmentally sensitive areas where leaks or spills of hydraulic fluid may result in contamination of the soil or nearby waterways. Conventional anti-wear hydraulic oils are formulated with metal-containing performance additives which can persist in the environment in the event of leaks
• The anti-wear performance of Clarity Synthetic Hydraulic Oils AW makes them suitable for high performance industrial applications utilising axial piston pumps where pressures may exceed 5000 psi
• High level of oxidation stability is especially applicable in high efficiency (high speed, high temperature, high output) applications where severe stress is placed on the hydraulic fluid

GST® 2300 oils are highly recommended for use in gas and steam turbines with and without loaded gearboxes. GST 2300 oils are designed to meet the critical lubrication demands of combined cycle turbines, large heavy duty industrial gas turbines, and gas and steam turbines with loaded gears. They are an excellent recommendation for many other industrial applications including air compression where R&O type oils are recommended.

• Protects equipment
  Robust anti-wear additive package minimizes wear by protecting surfaces when load causes breakdown of the lubricant film.
• Minimizes downtime
  Rust and oxidation inhibitors help to prevent the production of abrasive particles from rust formation, and deposits, varnishes and sludges from oil breakdown, which can damage equipment surfaces and seals, and block filters prematurely.
• Smooth operation
  Good hydrolytic stability and water separation characteristics promote excellent filterability in the presence of water contamination. Good anti-foam and air release properties help ensure smooth operation and system efficiency.

• Robust anti-wear additive protects equipment
• Rust and oxidation inhibitors help to prevent deposits and minimize downtime
• Good hydrolytic stability and water separation help with smooth operation

• Industrial hydraulic systems
• Hydraulics of mobile and construction equipment where a water separating oil is required
• Hydraulic systems with vane, gear or piston pumps

Premium quality, shear stable, multi-viscosity, anti-wear hydraulic fluid, designed to give robust protection for hydraulic systems subjected to wide variations in ambient and operating temperatures.

• Meropa lubricants are recommended for the lubrication of a wide variety of industrial and mobile equipment. Typical applications include enclosed gear systems, chain drives, sprockets, plain and anti-friction bearings, slide guides, and flexible couplings
• Meropa lubricants are particularly recommended for enclosed gear drives and speed reducers, ranging from fractional kilowatt gear motors to large, high power units in metal rolling mills, cement mills, and mine hoists
• Meropa lubricants are suitable for the lubrication of industrial hypoid-type gears and are also recommended for use in transmission gear case and worm drive axles on automotive, construction and mining equipment

1. Oxidation Stability
Resists oxidation at high temperatures, guaranteeing a long service life.

2. Detergent Properties 
Demonstrated excellent compressor cleanliness as well as a complete absence of copper transfer in numerous compressor tests.

3. Thermal and Chemical Stability 
Provides excellent thermal and chemical stability in the presence of the new environmentally safe hydrofluorocarbon (HFC) refrigerants.

4. Miscibility 
Exhibits excellent oil-refrigerant miscibility properties with HFC-refrigerants over a wide range of operating temperatures.

5. Lubricity 
Provides excellent lubricity, even in the presence of refrigerants.

• Extremely low pour point and Freon Floc point helps ensure essentially wax-free and efficient evaporator, line and control operation
• Ultra high performance lubricity and low temperature fluidity promotes system wear protection, efficiency and optimum uptime
• Advanced thermal stability aids resistance to harmful gum, varnish and deposit formation, helping reduce maintenance downtime
• Reliable oxidation resistance contributes to oil thickening protection, long fluid service life and extended oil change intervals
• Suitability for use with a wide range of refrigerants helps reduce inventory complexities and potential misapplications

• Extended lubricant service life
• Reduced maintenance and downtime
• Severe, extreme pressure protection

• Compressor Oil EP VDL are recommended for stationary and portable compressors, including compressors with oil lubricated pressure space, such as single and multistage reciprocating compressors or single and multistage centrifugal compressors
• The EP VDL 32 and EP VDL 46 grades are recommended primarily for use in oil-flooded screw compressors as well as centrifugal compressors. At extremely high compression pressures (approximately 1000 bar), such as in multistage reciprocating compressors, the higher viscosity grades may be used. However, particular care should be observed regarding the prescribed viscosity specification, as required by the compressor manufacturer
• Compressor Oil EP can be used in air or inert gas reciprocating compressors

• Flooded screw compressors
• Rotary air compressors
• Reciprocating air compressors
• Medium-speed marine diesel engine turbochargers

Cetus HiPerSYN Oils deliver value through:

• Long lubricant life in high temperature operations — Outstanding thermal and oxidation stability.
• Long machinery life and maximum compressor efficiency — Oxidative stability and low carbon-forming tendencies minimize sludge and deposit formation.
• Long drain intervals — Long lubricant life means less frequent oil changes.

Cetus HiPerSYN Oils are formulated with premium base oil technology and a high level of purity and refinement, and has been further enhanced by their unique additive systems that provide outstanding thermal and oxidation stability, high viscosity index, high flash point, low pour point, anti-wear protection, and excellent hydrolytic stability.

Regal SGT 22 delivers value through:

• Long service life — Excellent oxidation and thermal stability of the synthetic polyol ester base fluid and special additive system helps resist oil breakdown under severe, high temperature, high load conditions. The low volatility of the synthetic ester helps minimize evaporative losses.
• Minimal maintenance and downtime — Minimal coking tendency of the synthetic ester base fluid and additive system helps minimize deposit formation on bearings and other areas exposed to the heat of the hot gases. High load carrying capacity helps ensure excellent protection against wear. The oil is compatible with normal engine and accessory metallic construction materials and elastomeric sealing compounds.
• Excellent all-temperature performance — Excellent viscosity-temperature characteristics of the synthetic ester help promote outstanding low temperature fluidity to facilitate starting at low temperatures, while helping to ensure that an effective lubricant film is always available under the most severe, high temperature conditions to protect critical components against wear.

Regal SGT 22 is a premium performance, synthetic polyol ester-based turbine lubricant for use in modified aviation-type gas turbines in stationary and marine service. A special additive system imparts excellent high temperature thermal and oxidation stability.

GST® 2300 oils are highly recommended for use in gas and steam turbines with and without loaded gearboxes. GST 2300 oils are designed to meet the critical lubrication demands of combined cycle turbines, large heavy duty industrial gas turbines, and gas and steam turbines with loaded gears. They are an excellent recommendation for many other industrial applications including air compression where R&O type oils are recommended.

• Excellent service life
  Premium base oils and multi-component inhibitor system provide outstanding long-term oxidation stability to resist oil breakdown and varnish formation.
• Potential maintenance and downtime savings
  Premium base oils and oxidation inhibitor system resist the formation of harmful deposits in high temperature bearings and other hot areas of the turbine. The rust inhibitor protects system components against corrosion. Good water separability ensures rapid settling of water accumulated from steam condensate, or leakage from salt water cooling.
• • Reliable operation
  Non-silicone foam inhibitor allows rapid release of entrained air while minimizing foam formation to enable reliable operation of sensitive hydraulic control devices. Long term reliability assisted by effective resistance to varnish formation.

Premium performance, turbine oil formulated from premium base oils plus rust, oxidation and foam inhibitors. Designed primarily for use in industrial gas and steam turbines it is also suited to many other industrial applications including air compression where R&O type oils are recommended.